LCD Screen
Information symbol. This means:
•
There is a trouble in the system (see page 30).
•
There is an alarm in memory (see page 17).
•
Zones or a zone is currently bypassed (see
page 14).
Remote Controls
MG-REM1
8
Technical Manuals Online! - http://www.tech-man.com
Technical Manuals Online! - http://www.tech-man.com
Alarm clock feature enabled (see page 26).
Remote Control Default Settings
Your installer can add other functions and/or change the default settings of your remote controls. To use the functions programmed in your
remote control, press and hold the desired key(s) for at least two seconds. Your remote control has already been programmed with the
following features:
= Force Arm (page 13)
= Disarm (page 16)
= Turn FM radio ON/OFF (page 25)
= Scroll through programmed radio station's in memory (page 25)
Instructions and/or messages appear in this line
The function or action associated with the
action key directly underneath the text appear in
this line. Press the appropriate action key to
access the function.
User Guide