Schwinn 112 Parts List, Full Size Hardware Chart, Product Illustration, Assembly Instructions page 9

Attach Pedals to the Crank Arms on Main Unit
Assembly hardware required:
1. Attach right PEDAL (#13R) to the right crank arm on the RIGHT CRANK
(#38R). Thread the pedal onto the crank arm and then tighten with pedal wrench.
2. Attach left PEDAL (#13L) to the left crank arm on the LEFT CRANK (#38L).
Thread the pedal onto the crank arm and then tighten with pedal wrench. Note:
There is a right pedal and a left pedal, marked by R and L. The threading
on the left pedal is reversed from the right pedal. Counterclockwise rotation
tightens while Clockwise rotation loosens on the left pedal. To avoid
stripping of the threads be careful to use the proper pedal.
3. Attach PEDAL STRAPS (#28) to each PEDAL (#13). Again each strap is labeled
with an R or an L corresponding to the right and left pedal straps.
Assembly Stage #2
NONE
page:9/16