Schwinn 112 Parts List, Full Size Hardware Chart, Product Illustration, Assembly Instructions page 3

ensured if it is regularly examined and maintained. (See Maintenance
section of the Owner's Manual)
 Refer to the Maintenance section in the Owner's Manual and disconnect
power supply before servicing the bike.
 Replace Warning Label if damaged, illegible, or removed.
 We recommend that a minimum distance of 1 meter (39 inches)
surrounding the bike is kept clear of all obstructions, including children,
bystanders, and pets. This is to ensure adequate clearance for easy
access to the bike and to avoid any possible contact with the moving
pedals
112/113 Schwinn Upright Bike Parts List,
Hardware Chart, and Assembly Instructions
Assembly of the 112/113 Upright Bike is divided into 7 easy stages; each
comprised of only a few setup steps. Before proceeding with the assembly,
please read over the easy to follow instructions to familiarize yourself with the
process.
• A flat area of 4' x 6' is suggested to assemble and properly use the 112/113
exercise bike.
• You will need the following tools to complete the assembly:
6mm Allen wrench (supplied)
Open wrench 13mm, 14mm, 15mm (supplied)
Phillips screwdriver (supplied)
Also, to ensure quick and easy set up of the 112/113 Upright Bike, please verify
the size and quantity of each of the enclosed assembly hardware. Included is a
handy full size hardware chart and parts list of each of the required assembly
hardware. Simply match up the corresponding hardware to each full size
drawing.
page:3/16