Section 6.0 Specifications - Osburn 2200 Owner's Manual

Us environmental protection agency phase ii certified wood insert
Hide thumbs Also See for 2200:
Table of Contents

Advertisement

Section 6.0 Specifications

Fuel Type
Test Standards
Maximum recommended heating area : 500 to 2,000 square feet
Heating capacity* – BTU/hr., EPA test wood : 30 437 BTU/h.
Heating capacity* – BTU/hr., seasoned cordwood : 70 000 BTU/h.
Optimum efficiency : 76%
*Why is the BTU indicated on the EPA label smaller than the one advertised?
You will notice a difference between the BTU output as indicated on the unit's white EPA label affixed to the glass and the BTU as
advertised on our web site and/or product literature. The maximum BTU output we advertise for this unit is what will be obtained
with a full load of seasoned cordwood inserted inside the firebox. The EPA output, on the other hand, is what has been obtained
during emissions testing. The EPA test procedure requires that a special type of wood be used and positioned inside the firebox in
a manner that does not represent the way the firebox volume would normally be utilized using seasoned cordwood. The EPA test
load is typically much smaller. Hence, the BTU as per the EPA label is reduced. The BTU output that should be considered by a
normal user is the one we advertise for seasoned cordwood.
Shipping Weight
Firebox Volume
Firebox Floor Area 18 3/16 x 17 (478mm x 431mm)
Door Opening Size
Maximum
Log Size
Flue Outlet
Optional
Components
Cordwood
ULC S628 (CSA B366.2) & UL 1482 residential.
383lbs (174kg)
3
2.2 cu.ft. (0.062 m
)
21.2" wide x 9.2" high (538 mm wide x 234 mm high)
18" (457 mm) if loading sideways
16" (406 mm) if loading front to back
6" (152 mm) diameter (vertical)
- 29 x 44 Faceplate
- 32 x 44 Faceplate
- 32 x 50 Faceplate
/38

Advertisement

Table of Contents
loading

Table of Contents