Osburn 2200 Owner's Manual page 17

2.8.2 Assembling the faceplate:
1. Place the faceplate panels, the finished side down on a flat, soft and nonabrasive surface.
2. Assemble the faceplate trim by setting the mitered corners using corner brackets. (See Figure
2.8.2a.)
3. Align the holes in the top with the ones in the right and left side panels and secure using the six (6)
screws, washers and nuts. (See Figure 2.8.2b.)
4. Slide the assembled trim over the edges of the faceplate.
5. Secure the trim to the faceplate using the eight "U" shaped clips. (See Figure 2.8.2b.)
Figure 2.8.2a Figure 2.8.2b
/17