General Instructions For The Air Control Mechanism, The Faceplate And The Blower Assembly - Osburn 2200 Owner's Manual

2.7.1.2 If the chimney liner does not align with the insert's flue outlet:
You can get a liner offset adapter (AC01370), sold separately. If you must install a liner
offset adapter, using a powered driver, secure the three brackets with the three screws
provided 30131 on top of the insert in the three holes in front of the flue outlet. The brackets
and screws are in the insert's instruction manual kit. Then follow the instructions in the
manual provided with the liner offset adapter kit.

2.8 General instructions for the air control mechanism, the faceplate and the blower assembly.

2.8.1 Air control mechanism:
All parts of this assembly are shipped in the combustion chamber of the insert. Fix the air control plate to the
air control extension lever using the ¼" x 1" hex head screws and nuts as shown in Figure 2.8.1a and 2.8.1b.
Figure 2.8.1a Figure 2.8.1b
/16