Password; Advanced Identity - Symbol MC3000 Integrator Manual

7-14 MC3000 Integrator Guide
The user name and password can be entered (but is not required) when the profile is created. When a profile authenticates with
credentials that were entered in the profile, caching rules do not apply. Caching rules only apply on credentials that are entered
through the login dialog box.

Password

Use the Password dialog box to enter a password. If EAP/TLS is the selected authentication type, the password is not required and
the field is disabled.
1. Enter a password in the Password field.
2. Select the Advanced ID check box, if advanced identification is required.
3. Tap Next, the Encryption dialog box displays. See

Advanced Identity

Use the Advanced ID dialog box to enter the 802.1X identity. The 802.1X identity value can be 63 characters long and is a case
sensitive identity supplied to the authenticator. In TTLS and PEAP, it is recommended that this field not contain a true identity, but
instead the identity anonymous, plus any desired realm (e.g. anonymous@myrealm). A user ID is required before proceeding.
When authenticating with a Microsoft IAS server, do not use advanced identity.
Figure 7-16. Username Dialog Box
Figure 7-17. Password Dialog Box
Encryption on page 7-16 for setting the encryption information.