Ordering Profiles; Using Leap For Wireless Network Security; Configuring Advanced Password Options - Symbol MC9000-G Product Reference Manual

Ordering Profiles

Select a profile from the list and tap Move Up or Move Down to order the profile. If the current
profile association is lost, Mobile Companion attempts to associate with the first profile in the list
and then the next until a new association is achieved.

Using LEAP for Wireless Network Security

LEAP is a security protocol that provides authentication and encryption for wireless networks.
Authentication is provided through the use of user names and passwords. There are multiple options
for caching of these credentials available to the administrator of the device through the registry.
There are multiple password caching options used for LEAP. The methods are:
• Save the password in the registry.
• Save the password until a warm boot (soft reset), but not saved in the registry. This method
also has a timeout available.
• Never save the password, requiring a dialog box on every power-up (suspend/resume).
The default is set to cache the password until a warm boot, with no timeout. If a different password
caching option is desired, the Spectrum24DS.reg registry file in the Platform folder must be re-
configured.

Configuring Advanced Password Options

All password caching options are configured in the file Spectrum24DS.reg, located in the Platform
folder. The file must be edited on a PC and copied back onto the device after editing is complete. The
section of this file which needs editing reads "[HKEY_LOCAL_MACHINE\Comm\NETWLAN1\Parms]."
Cache the Password
To cache the password, edit the registry file using a text editor with the following changes:
1. Change the LCachePwd value from 1 to 0:
LCachePwd = dword:0
2. Uncomment the UNAME and UPwd values (deleting the semicolons at the beginning of each
line):
UNAME = yLEAPUserName
UPwd = myLEAPPassword
Spectrum24 Network Configuration
21
6-