Symbol MC3000 Integrator Manual page 110

6-16 MC3000 Integrator Guide
Error Text
Insufficient data available to
complete record
Invalid Symbol HEX file
Unrecognized or unsupported HEX
record
Invalid data in HEX file
Exceeded max size
Partition is not valid on this device
Wrong destination code
File type does not support IPL Auto
Select
Non-contiguous record found
Timed Out - No data
Fail: Buffer Overrun
Partition Table not Valid
Invalid file format
Table 6-4. IPL Errors (Continued)
Error Number
-21 A Symbol HEX file download was attempted but the HEX file is invalid. Ensure the file is in Symbol HEX
file format.
-23 A Symbol HEX file download was attempted but the HEX file is invalid. Ensure the file is in Symbol HEX
file format.
-24 The Symbol HEX file being downloaded contains an invalid or unrecognized HEX record. Ensure the file
is in proper Symbol HEX file format.
-25 The Symbol HEX file being downloaded contains invalid data. Ensure the file is in proper Symbol HEX
file format with valid HEX data.
-26 The download file is too large to fit into the space allocated for it. Either make the file smaller or increase
the space allocated for it by altering the partition table.
-27 The downloaded file specifies a partition entry that does not exist on the device. Only download files
that are valid for this device, or change the partition table so that the new file is valid on the device.
-28 A specific partition was chosen from the IPL main menu (not Auto Select) but the file selected for
download was for another partition. Ensure that the partition selected from the IPL main menu matches
the file selected for download.
-29 Monitor, Power Micro and Partition Table cannot be loaded with Auto Select. Select the appropriate
area, and try again.
-30 A Symbol HEX file download was attempted but the HEX file is invalid. Ensure the file is in Symbol HEX
file format.
-31 IPL was waiting for data from the source device but timed out before receiving any. Check the source
device connectivity and retry.
-32 The serial port device could not keep up with incoming data. Retry the serial download with a lower baud
rate.
-33 The size of flash memory is different than that described in the partition table. Retry the download with
the correct partition table file.
-34 The file format is invalid. Only Symbol HEX files are supported by IPL.
Probable Cause