Sending The Hex Image - Symbol MC3000 Integrator Manual

Sending the Hex Image

Once the hex file is built, it can be downloaded to the mobile computer.
To load the hex files on to the mobile computer:
1. For downloads using either a serial or a USB connection, connect the mobile computer to the development computer using
the Single Slot Serial/USB cradle or MC3000 Communication/Charge cables.
2. Press and hold a yellow Scan button and the Power button simultaneously until the mobile computer resets into IPL.
3. When the Initial Program Loader menu appears, release scan button and Power button.
To ensure a successful download, do not remove power from the mobile computer while in IPL mode.
4. Choose Auto Select or use the up and down scroll buttons to select the partition to download, then press Enter.
Initial Program Loader
Platform
Application
Config Block
Windows CE
Monitor
Splash Screen
Power Micro
Partition Table
Command File
System Reset
Auto Select
Figure 6-6. Initial Program Loader Menu
Creating/Loading Hex Images 6-9