Projector Parts And Functions; Front View; Rear View - Barco RLM W12 User Manual

2

Projector parts and functions

Front view

Lens
Ventilation inlet
The internal cooling fan draws
cool air from the ventilation inlet
into the projector.
Infrared receiver

Rear view

Power switch
I → ON
O → OFF
Voltage Selector
(Default at 110V)
Power inlet
Adjustable foot
Adjustable foot
POWER
Displays the projector's power
status
ERROR
Displays the cause of problem (i.e.
temperature, fan, lamp or system)
that has led to projector malfuncti
on.
Refer to " Page 58 : LED STATUS ".
fot the detail display information.
▲ ▼ bottons
Use these buttons to scroll,
configure or adjust items on the
OSD or toggle between different
images.
STAND BY
The indicator that shows the projector's
.
standby status
10
Ventilation slot
The hot air generated
inside the projector is
dispersed through the
ventilation slot. Make
sure the ventilation slot
is free from obstruction.
Adjustable foot
Adjust the height and angle of the
projector with the adjustable foot
Projector Keypad
Infrared sensor
MENU
Displays or hides the OSD
adjustment screen
ENTER
Press this button to confirm selection
of OSD item; you can choose from
"Select Item" or access "Sub Menu"
configurations.
STBY
Use this button to start up or shut down
.
the projector
INPUT
Used to toggle between different input
signal source
Refer to " Page 32 : Input Selection ". for
more details