Projector Parts And Functions; Front View; Rear View - Barco RLM W8 User Manual

2

Projector parts and functions

Front view

Adjustable foot
Adjust the height and angle of the
projector with the adjustable foot
Ventilation inlet
The internal cooling fan draws
cool air from the ventilation inlet
into the projector.
Adjustable foot

Rear view

Ventilation slot
The hot air generated
inside the projector is
dispersed through the
ventilation slot. Make
sure the ventilation slot
is free from obstruction.
Adjustable foot
Lamp cover
Adjustable foot
▲ ▼ bottons
Use these buttons to scroll,
configure or adjust items on the
OSD or toggle between different
images.
MENU
Displays or hides the OSD
adjustment screen
POWER
Displays the projector's power
status
ERROR
Displays the cause of problem (i.e.
temperature, fan, lamp or system)
that has led to projector malfuncti
on.
10
MENU
ENTER
ON ERROR
LED STATUS
Refer to " Page 59 : LED STATUS ".
fot the detail display information.
Projector buttons
Power inlet
Power switch
I → ON
O → OFF
Infrared sensor
INPUT
Used to toggle between different input
signal source
Refer to " Page 2 : INDEX ". for more
details
INPUT
STBY
STBY
Use this button to start up or shut down
the projector
STAND BY
STAND BY
The indicator that shows the projector's
standby status
ENTER
Press this button to confirm selection
of OSD item; you can choose from
"Select Item" or access "Sub Menu"
configurations.
Infrared
receiver
Lens
Lens cover
.
.