S-Video/Video Connection; Component Connection - Barco RLM W12 User Manual

S-Video/Video connection

If the image input device offers both S-Video and Video connection, it is recommended that
you choose S-Video to obtain better image quality.If both the S-Video and Video inputs are
connected to the projector, the projector will prioritize S-Video signal input and image from
the Video input will not be played.
10/100 BASE-T
IN
SDI / HDSDI / 3G

COMPONENT connection

Take the 3/5 cabled RGB component video connectors from the source equipment to the
projector's COMPONENT1 SCART or COMPONENT2 jacks.

HDMI
RS-232
 
HDMI HDMI
OUT
12V TRIGGER
350mA
RS-232 I II IR ext. S-VIDEO VIDEO
RGB-HV/SOG G/Y

HDMI
Installing the projector
12V TRIGGER
350mA
I II IR ext. S-VIDEO VIDEO
RGB-HV/SOG G/Y B/Pb
DVD player, VCR, satellite receiver,
LD and so forth
Y Pb Pr
RGB-S
YUV 1
B/Pb R/Pr H V
RGBHV / YUV 2
DTV
DTV set-top-box or other compo-
(YPbPr)
nent (YPbPr) input source
RGB-S
YUV 1
R/Pr H V
RGBHV / YUV 2
4
23