Range Of Effective Remote Control Signal Reception; Installing Batteries In The Remote Control - Barco RLM W12 User Manual

Rlm w12 projector
Hide thumbs Also See for RLM W12:
Table of Contents

Advertisement

Range of effective remote control signal
reception
The diagram below illustrates the range of effective remote control signal reception.
Note: A void placing the remote control at places of high temperature or humidity as it could cause the
remote control to malfunction.

Installing batteries in the remote control

Remove the cover by
sliding it in the direction
indicated by the arrow.
Note1: Be sure to insert the batteries in the corresponding orientations to match the polarities.
Note2: D o not mix new batteries with used batteries as it would shorten the life of new batteries or cause
leakage.
Note3: O nly used AA batteries as instructed; do not attempt to insert different types of batteries into the remote
control.
Note4: I f the remote is going to be unused for long periods of time, be sure to remove the batteries to prevent
leakage, which could damage the remote control.
Note5: T he liquid contents in the batteries is harmful to the skin; do not touch the leakage with your bare hands
directly. When installing fresh batteries, be sure to clean up the leakage thoroughly.
Note6: U nder most circumstances, you only need to point the remote control towards the screen and the IR
signal would be reflected off the screen and picked up by the IR sensor on the projector.But under specific
circumstances, the projector may fail to receive signals from the remote control due to environmental
factors.When this happens, orient the remote control at the projector and try again.
Note7: I f the range of effective remote control signal reception decreases or if the remote control stops working,
replace the batteries.
Note8: I f the infrared receiver is exposed to fluorescent lamp or strong sunlight, the remote control may not
operate normally.
Note9: R efer to the regulations enforced by your local government on the disposal of used batteries; improper
disposal could damage the environment.
40°
Insert two new AA
batteries
(observe the polarity).
Projector parts and functions
40°
Replace the cover.
2
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents