Assembly Instructions - York Fitness Challenger Definition 51070 Owner's Manual

Assembly Instructions

1. Before you start
THIS TREADMILL TAKES UP A FLOOR SPACE OF 181 CM x 82 CM AND WEIGHS 83 KG.
A. Prepare your work area - it is important you
assemble the product in a clean and uncluttered
space.
B. Work with a friend - we recommend you have
someone assist you with the assembly as some of
the components are quite heavy.
C. Open the carton - checking any warnings on the
carton and make sure you have it the right way up.
D. Unpack the carton -
a. Remove all the parts and packaging from above
the treadmill and lay them out on the floor.
b. Flatten the sides of the carton and remove the
rest of the packaging from around the treadmill.
c. Make sure you have the following parts:
Part No.
B36
Left front
support cover x 1
Fixings
Tools and
consumable
IF YOU SUSPECT YOU MAY HAVE SOME PARTS MISSING, PLEASE CONTACT US BEFORE GOING BACK TO YOUR
RETAILER. REFER TO THE CUSTOMER SUPPORT SECTION FOR CONTACT DETAILS.
6 • CHALLENGER Definition Treadmill | OWNER'S MANUAL
ChallengerDefinitionTreadmill_In6 6
Part No.
B37
Right front
support cover x 1
Part No.
C04
Curved washer x 4
Part No.
C31
6 mm screw x 6
Part No.
D01
Allen key (30 mm x 70 mm)
Part No.
D03
nut driver / Screw driver
Part No.
B01
Safety key x 1
Part No.
C05
20 mm hex head bolt x 6
Part No.
D02
Allen key (75 mm x 75 mm)
Part No.
B12
Speaker wire x 1
Part No.
C25
Flat washer x 2
Lubrication oil
11/23/08 3:14:09 PM