Serial Port Connectors (Com1/J41A, Com2-Com5/J2A-D); Vmebus P1 Connector; Table 5-10 Com Port Connector Pin Assignments; Table 5-11 Vmebus P1 Connector Pin Assignments - Emerson MVME3100 Series Installation And Use Manual

5.2.4 Serial Port Connectors (COM1/J41A, COM2—COM5/J2A-D)
There is one front access asynchronous serial port interface (SP0) that is routed to the RJ-45
front-panel connector. There are four asynchronous serial port interfaces, SP1 — SP4, which are
routed to the P2 connector. The pin assignments for these connectors are as follows:

Table 5-10 COM Port Connector Pin Assignments

Pin
1
2
3
4
5
6
7
8
5.2.5

VMEbus P1 Connector

The VME P1 connector is a 160-pin DIN. The P1 connector provides power and VME signals for
24-bit address and 16-bit data. The pin assignments for the P1 connector is as follows:

Table 5-11 VMEbus P1 Connector Pin Assignments

ROW Z
1 Reserved
2 GND
3 Reserved
4 GND
5 Reserved
6 GND
7 Reserved
MVME3100 Single Board Computer Installation and Use (6806800M28C)
Signal
No connect
RTS
GND
TX
RX
GND
CTS
No connect
ROW A ROW B
D00 BBSY*
D01 BCLR*
D02 ACFAIL*
D03 BG0IN*
D04 BG0OUT*
D05 BG1IN*
D06 BG1OUT*
ROW C ROW D
D08 +5V
D09 GND
D10 Reserved
D11 Reserved
D12 Reserved
D13 Reserved
D14 Reserved
Pin Assignments
1
2
3
4
5
6
7
97