Table of Contents
Advertisement
MOTLoad Firmware
3.6
Remote Start
As described in the MOTLoad Firmware Package User's Manual, listed in
Documentation, remote start allows the user to obtain information about the target board,
download code and/or data, modify memory on the target, and execute a downloaded
program. These transactions occur across the VMEbus in the case of the MVME3100. MOTLoad
uses one of four mailboxes in the Tsi148 VME controller as the inter-board communication
address (IBCA) between the host and the target.
CR/CSR slave addresses configured by MOTLoad are assigned according to the installation slot
in the backplane, as indicated by the VME64 Specification. For reference, the following values
are provided:
Slot Position
1
2
3
4
5
6
7
8
9
A
B
C
For further details on CR/CSR space, please refer to the VME64 Specification, listed in
B, Related
Documentation.
The MVME3100 uses a Discovery II for its VME bridge. The offsets of the mailboxes in the
Discovery II are defined in the Discovery II User Manual, listed in
Documentation, but are noted here for reference:
58
CS/CSR Starting Address
0x0008.0000
0x0010.0000
0x0018.0000
0x0020.0000
0x0028.0000
0x0030.0000
0x0038.0000
0x0040.0000
0x0048.0000
0x0050.0000
0x0058.0000
0x0060.0000
MVME3100 Single Board Computer Installation and Use (6806800M28C)
Appendix B, Related
Appendix
Appendix B, Related
Advertisement
Table of Contents
