Functional Description; Overview; Features; Table 4-1 Mvme3100 Features Summary - Emerson MVME3100 Series Installation And Use Manual

Functional Description

4.1

Overview

This chapter describes the MVME3100 and the MVME721 rear transition module (RTM) on a
block diagram level.
4.2

Features

The following tables list the features of the MVME3100 and its RTM.

Table 4-1 MVME3100 Features Summary

Feature
Processor/Host
Controller/Memory Controller
System Memory
2
I C Interface
Flash
MVME3100 Single Board Computer Installation and Use (6806800M28C)
Description
— Single 833 MHz MPC8540 PowerQUICC III™ integrated processor
(e500 core)
— Integrated 256KB L2 cache/SRAM
— Integrated four-channel DMA controller
— Integrated PCI/PCI-X controller
— Two integrated 10/100/1000 Ethernet controllers
— Integrated 10/100 Ethernet controller
— Integrated dual UART
— Integrated I2C controller
— Integrated programmable interrupt controller
— Integrated local bus controller
— Integrated DDR SDRAM controller
— One SODIMM socket
— Up to DDR333, ECC
— One or two banks of memory on a single SODIMM
— One 8KB VPD serial EEPROM
— Two 64KB user configuration serial EEPROMs
— One real-time clock (RTC) with removable battery
— One temperature sensor
— Interface to SPD(s) on SODIMM and P2 for RTM VPD
— 128MB soldered Flash with two alternate 1MB boot sectors selectable
via a hardware switch
— Hardware switch or software bit write protection for entire logical bank
Chapter 4
69