Ethernet Connectors (Gige/J41B, Gige/J2B,Gige/J2A); Serial Port Connectors (Com1/J41A, Com2-Com5/J2A-D); Table 5-7 Ethernet Connectors Pin Assignment; Table 5-8 Com Port Connector Pin Assignments - Emerson MVME4100 Installation And Use Manual

5.5.2

Ethernet Connectors (GIGE/J41B, GIGE/J2B,GIGE/J2A)

The MVME4100 routes two 10/100/1000Mb/s full duplex Ethernet interfaces to the VMEbus
P2 connector. The MVME7216E routes these from the P2 connector to the RJ-45 connectors on
RTM panel. These connectors include integrated LEDs for speed and activity indication. The pin
assignments for these connectors are as follows:

Table 5-7 Ethernet Connectors Pin Assignment

Pin #
1
2
3
4
5
6
7
8
5.5.3
Serial Port Connectors (COM1/J41A, COM2—COM5/J2A-D)
The MVME4100 routes four asynchronous serial port interfaces, SP1 — SP4, to the VMEbus P2
connector. The MVME7216E routes these from the P2 connector to the RJ-45 connectors on
RTM panel. The pin assignments for these connectors are as follows:

Table 5-8 COM Port Connector Pin Assignments

Pin
1
2
3
4
5
6
MVME4100 Single Board Computer Installation and Use (6806800H18D)
Signal 1000 Mb/s
MDIO0+ _DA+
MDIO0- _DA-
MDIO1+ _DB+
MDIO1- _DC+
MDIO2+ _DC-
MDIO2- _DB-
MDIO3+ _DD+
MDIO3- _DD-
Signal
No connect
RTS
GND
TX
RX
GND
Transition Module
10/100 Mb/s
TD+
TD-
RD+
Not Used
Not Used
RD-
Not Used
Not Used
99