Vpd Eeprom; Rtm Vpd Eeprom; Ethernet Phy Address; Table 7-5 Phy Types And Mii Management Bus Addresses - Emerson MVME3100 Series Installation And Use Manual

Programming Details
7.7

VPD EEPROM

The MVME3100 board provides an 8KB dual address serial EEPROM containing vital product
data (VPD) configuration information specific to the MVME3100. Typical information that may
be present in the EEPROM may include: manufacturer, board revision, build version, date of
assembly, memory present, options present, L2 cache information, etc. The VPD EEPROM is
hardwired to have a device ID as shown in
EEPROM Datasheet listed in
7.8

RTM VPD EEPROM

The MVME3100 board provides an 8KB dual address serial EEPROM containing VPD
configuration information specific to the MVME3100 RTM. Typical information that may be
present in the EEPROM may include: manufacturer, board revision, build version, date of
assembly, options present, etc. The RTM VPD EEPROM device ID is user selectable with the
recommended value for MVME3100 as shown in
Serial EEPROM Datasheet listed in
7.9

Ethernet PHY Address

The assigned Ethernet PHY addresses on the MPC8540 MII management (MIIM) bus is shown
in the following table.

Table 7-5 PHY Types and MII Management Bus Addresses

MPC8540
Ethernet Port Function/Location
TSEC1 Gigabit Ethernet port routed to front
panel
TSEC2 Gigabit Ethernet port routed to P2
Fast Ethernet 10/100 Ethernet port routed to P2
Controller
132
Table 7-4 on page
Appendix B, Related Documentation, for additional details.
Table 7-4 on page
Appendix B, Related
PHY Types
BCM5461S
BCM5461S
BCM5221
MVME3100 Single Board Computer Installation and Use (6806800M28C)
130. Refer to the 2-Wire Serial
130. Refer to the2-Wire
Documentation, for additional details.
PHY MIIM Address
[4:0]
01
02
03