Sending A Fax Scanning Adjustment - Brother MFC-9880 Owner's Manual

2
Sending a Fax
Scanning Adjustment
Contrast
If your document is very light or very dark, you might want to set the contrast accordingly. Use
LIGHT to send a light document. Use DARK to send a dark document. After sending the document
the contrast setting is set to AUTO (suitable for most documents) automatically.
1
Insert the document face up in the Automatic Document Feeder, or face down on the glass
platen. (See Setting the Document, page 1)
2
Press Menu, 2, 2, 1.
3
Use or to select AUTO, LIGHT, or DARK.
4
When the screen displays your selection, press Set.
5
Press 2 if you are finished choosing settings, and go to Step 6—OR—Press 1 if you want to
select additional settings. The display returns to Setup Send menu.
6
Enter a fax number and press Fax Start.
Fax Resolution
When you have a document in the Automatic Document Feeder, or on the glass platen, you can use
the Resolution key to temporarily change the setting. Press Resolution repeatedly until the LEDs
show the setting you want.
—OR—
You can change the default setting.
1
Press Menu, 2, 2, 2.
2
Press or
3
Press Stop/Exit.
STANDARD: Suitable for most typed documents. (Fine and S.Fine lights are OFF)
FINE:
S.FINE:
PHOTO:
20
Chapter 2
to select the resolution you want, and then press Set.
Good for small print; transmits a little slower than Standard resolution.
(Only the Fine light is ON)
Good for small print or artwork; transmits slower than Fine resolution.
(Only the S.Fine light is ON)
Use when document has varying shades of grey; slow transmission time.
(Both Fine and S.Fine lights are ON)