Changing Default Settings - Brother MFC-9880 Owner's Manual

Paper Type
You can use the following types of paper for copying. For the best print quality, select the type of
media that you are using.
THIN (60-69 gsm)
PLAIN (70-95 gsm)
THICK (96-120 gsm)
THICKER (121-161 gsm)
TRANSPARENCY
1
Press Options and
2
Press or to select your type of paper, and then press Set.
3
Press Copy—OR—Press

Changing Default Settings

Press Menu, 3 to change default settings for Copy mode. These settings will remain until you
change them again by pressing Menu. Adjust the Copy Mode and Contrast and Paper Type settings.
By pressing a number, you can adjust copy settings as shown in the following chart. Press
to move through the selections for each setting. Press Set to save your selection. Press Stop/Exit
—OR—Press to select the next setting you want to change.
Press Menu, and 3.
1.COPY MODE
2.CONTRAST
3.PAPER TYPE
For thin paper
For ordinary plain paper
For heavy weight paper or rough paper
For heavier weight paper, rough paper or bond paper
For transparency (OHP)
or to select PAPER TYPE, and then press Set.
or for additional settings.
AUTO
TEXT
PHOTO
–
THIN
PLAIN
THICK
THICKER
+
is default
Making Copies
or
57