Setup Delayed Polling Receive; Sequential Polling - Brother MFC-9880 Owner's Manual

Setup Delayed Polling Receive

You can set the machine to begin Polling Receive at a later time.
1
Press Menu, 2, 1, 8.
2
Press or to choose TIMER, and press Set.
3
The screen prompts you to enter the time you want to begin polling.
4
Enter the time (in 24-hour format) you want to begin polling.
For example, enter 21:45 for 9:45 PM.
5
Press Set. The screen prompts you to enter the fax number you are polling.
6
Enter the fax number, and press Fax Start.
The machine makes the polling call at the time you
entered.
You can set up only one Delayed Polling.

Sequential Polling

The machine can request documents from several fax units in a single operation. You just specify
several destinations in Step 4. Afterward, a Sequential Polling Report will be printed.
1
Press Menu, 2, 1, 8.
2
to choose STANDARD, SECURE or TIMER, and press Set when the screen
Press or
displays the setting you want.
3
If you selected STANDARD, go to Step 4.
• If you selected SECURE, enter a four-digit number and press Set, and then go to Step 4.
• If you selected TIMER, enter the time (in 24-hour format) you want to begin polling and
press Set, and then go to Step 4.
4
Specify the destination fax machines (up to 182), which you wish to poll by using One Touch,
Speed Dial, Search, a Group or the dial pad. You must press Broadcast between each location.
5
Press Fax Start.
The machine polls each number or group number in turn for a document.
44
Chapter 8
ENTER FAX NO.
PRESS FAX START