Custom Settings - Brother MFC-9880 Owner's Manual

Custom Settings

Volume Settings
Ring Volume
You can select how loud, the machine rings. The ring volume can be turned off for silent reception
if required.
1
Press Menu, 1, 3, 1.
2
Press or to select OFF, LOW, MED, or HIGH.
3
Press Set when the screen displays your selection.
4
Press Stop/Exit.
Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The machine comes with this volume set to LOW.
When the beeper is set to LOW or HIGH, the machine beeps every time you press a key or make
an error, and at the end of sending or receiving a fax.
1
Press Menu, 1, 3, 2.
2
Press or to select your setting.
3
When the screen displays the setting you want, press Set.
4
Press Stop/Exit.
Speaker Volume
You can set the volume of the machine speaker.
1
Press Menu, 1, 3, 3.
2
Press or to select your volume setting (OFF, LOW, MED, or HIGH).
3
Press Set when the screen displays your selection.
4
Press Stop/Exit.
—OR—
You can adjust the speaker volume when the machine is onhook (after you pressed Hook).
You can turn the volume OFF or you can select a volume level.
Press or to adjust the volume level. The display shows the setting you are choosing.
Each key press changes the volume to the next setting. The new setting will remain until you change
it again. Press Hook to disconnect the line.
Toner Save
You can conserve toner using this feature. When you set Toner Save to ON, print appears somewhat
lighter. The default setting is OFF.
1
Press Menu, 1, 4.
2
Press or to select ON (or OFF).
3
Press Set.
4
Press Stop/Exit.
15
Setup