Optional Accessories; Chapter 20 Optional Accessories; Memory Board - Brother MFC-9880 Owner's Manual

20

Optional Accessories

Memory Board

The memory board is installed on the main controller board inside the machine. When you add the
optional memory board, it increases the performance for both fax and printer operations.
MFC-9880 with Standard Memory: 8MB
In general, the DIMM must have the following specifications:
Type:
CAS Lantency:
Clock Frequency:
Capacity:
Height:
Parity:
DRAM Type:
Some DIMMs may not work with the machine. For more information, consult the dealer where you
purchased the machine. For the latest information from Brother visit: http://solutions.brother.com
Installing the Optional Memory Board
1
Disconnect the telephone line cord, unplug the machine power cord from the AC mains outlet,
and then disconnect the interface cable.
Model Name
100 pin and 32 bit output
2 or 3
66 MHz or more
16 or 32 MB
46 mm (1.8 inches) or less
NONE
SDRAM 4 Bank
• Unplug the power cord before installing (or removing) the memory board.
Optional Memory (recommended)
16 MB BUFFARO TECHNOLOGY 12323-0001
32 MB BUFFARO TECHNOLOGY 12324-0001
Optional Accessories
157