Answer A Call; Redial A Number; Mute A Call - Cisco 7905G User Manual

Soft Key
Reorder
Select
Operating Your Cisco Unified IP Phone
Place a Call
To place a call, use one of the following methods:
• Lift the handset and dial the number.
• Dial the number, and then lift the handset.
• Dial the number, and then press the Dial soft key.
• Press the line button for your extension, and then dial the number.
• Press the New Call soft key, and then dial the number.
• If you have established speed-dial numbers, press a speed-dial button.
• If you have selected a number from a directory, press the Dial soft key.
Note Use the backspace (<<) soft key to erase digits that were entered incorrectly.

Answer a Call

To answer a call, lift the handset.
End a Call
To end a call, use one of the following methods:
• Hang up the handset.
• Press the EndCall soft key.

Redial a Number

To redial the most recently dialed number, use the following method:
1. Lift the handset.
2. Press the Redial soft key.
Hold a Call
To place a call on hold press the Hold button.
To retrieve a held call press the Hold button again.
Because the hold feature can generate music or a beeping tone, avoid using hold when dialed into a remote conference
Note
system. Simple three-party conferences that are created locally on your phone can safely be placed on hold without
introducing music or beeps into the conference.

Mute a Call

To mute an active call so that the other parties cannot hear you speak:
• Press the Mute soft key. The Mute soft key automatically lights, indicating that the other party cannot hear you.
4
Description
Reorder the entries in the Personal Directory.
Selects the highlighted option.