Cisco 7905G User Manual page 12

Soft Key
Exit
Hold
more
NewCall
Number
Ok
Play
Redial
Reorder
Select
Trnsfer
Up
URL
Operating Your Cisco Unified IP Phone
Place a Call
To place a call, use one of the following methods:
• Lift the handset and dial the number.
• Dial the number, and then lift the handset.
• Dial the number, and then press the Dial soft key.
• Press the line button for your extension, and then dial the number.
• Press the Speaker button, and then dial the number.
• Press the New Call soft key, and then dial the number.
• If you are using a headset, press the Headset button, and then dial the number.
• Dial the number, and then press the Headset button.
• If you have established speed-dial numbers, press a speed-dial button.
• If you have selected a number from a directory, press the Dial soft key.
Use the backspace (<<) soft key to erase digits that were entered incorrectly.
Note
Answer a Call
To answer a call, use one of the following methods:
• Lift the handset.
• If you are using a headset, press the Headset button. If necessary, press the line button to select between incoming calls.
• To use the speakerphone, press the Answer soft key or the Speaker button.
End a Call
To end a call, use one of the following methods:
• Hang up the handset.
12
Function
Exits from current selection.
Places an active call on hold. Resumes a held call.
Scrolls through additional soft key options (for example, use the more soft key to locate
the Number soft key).
Opens a new line on the speakerphone to place a call.
Toggles character input mode from alphanumeric to numeric.
Confirms the selection.
Plays the ring sound sample.
Redials the last number dialed.
Reorder the entries in the Personal Directory.
Selects the highlighted option.
Transfers active calls to another extension.
Increases the LCD screen contrast.
Enter alphanumeric characters for call forwarding.