Conference Calls; Conference With Stations And Co Lines - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Add a Second CO Line:
1. While on a CO line call, press
the Cnf/Trn button.
2. Access a second CO line and
dial the next telephone
number.
3. Press the Cnf/Trn button
after the party answers.
To Add a Station to a CO Line
Call:
1. Press the Cnf/Trn button.
2-22

CONFERENCE CALLS

This feature enables you to add other parties to an existing call. (If you
have an LCD telephone, you can use Soft Keys to make a conference
call. See the LCD user guide for details.)

CONFERENCE WITH STATIONS AND CO LINES

Conference Calls can be up to two stations and two CO lines, up to three
stations and one CO line or up to four stations.
NOTE: The STRATA DK8 supports two simultaneous conferences. If a
four-party conference is in progress, the second conference may contain
three parties maximum.
After you press the button, you will hear intercom dial tone.
The Line LED will flash green at the conference rate if the call is on a
Line button, and the Intercom LED will flash green at the in-use rate.
You can access a CO line by pressing a Line or Pooled Line Grp button,
or by dialing an access code (7 0 1 ~ 7 0 4 for DK8, 7 0 1 ~ 7 0 8 for
DK16 for a line number; 8 1 ~ 8 4 for DK8, 8 1 ~ 8 8 for DK16 for a line
group; and 9 for the general group or Least Cost Routing).
If you receive a busy tone or no answer, return to the original connection
by pressing the original Line button, or hang up and the original
connection will recall you immediately.
Both Line LEDs will flash green at the in-use rate.
All parties will be conferenced. You may add one more station to a two-
CO line conference.
After you press the button, you will hear intercom dial tone.
FEATURE OPERATION