Two (Tandem) Co Line Connection - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Establish a Tandem CO Line
Connection (Line to Line):
1. While on a CO line call, press
the Cnf/Trn button.
2. Press another Line or
Pooled Line Grp button
and dial a telephone number.
3. Press the Cnf/Trn button
after the party answers.
All digital telephone users can answer intercom calls handsfree (on-
hook), but only users with a speakerphone can talk handsfree when
originating calls while on-hook.
The microphone and accompanying LED are always on when receiving
intercom calls to allow Handsfree Answerback, and may be on or off
when placing an on-hook CO line or intercom call.
Each station's microphone may be set in system programming to be
either on or off at the start of handsfree dialing.
Each station's Mic button may be set in system programming to
switch on/off with one touch or to switch off only while pressed.
NOTES:
1. To change from speakerphone to handset, lift handset.
2. To change from handset to speakerphone:
Press and hold down the Spkr button.
Return handset on-hook.
Release the Spkr button.
3. The Mic and Microphn Cut-off buttons function on Off-hook Call
Announce calls for privacy.

TWO (TANDEM) CO LINE CONNECTION

You can connect two CO lines and then drop out of the conversation.
Your telephone must have Line or Pooled Line Grp buttons for both CO
lines and must be allowed to operate this feature in system
programming.
After you press the button, you will hear intercom dial tone, the Line or
Pooled Line Grp LED will flash green at the conference rate, and the
Intercom LED will flash green at the in-use rate.
The new Line or Pooled Line Grp LED will flash green at the in-use rate.
The Line or Pooled Line Grp LEDs will flash green at the in-use rate, and
all parties will be conferenced.
If you receive a busy tone or no answer, return to the original connection
by pressing the original Line or Pooled Line Grp button.
FEATURE OPERATION
2-49