Microphone Control - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Make an Intercom Call (On-
hook Dialing) with Voice First
Signaling:
1. Leave the handset on-hook.
2. Press the Intercom button.
3. Dial the desired station
number.
4. Speak toward the telephone
at a normal voice level .
5. Press the Spkr button to
disconnect the call.
2-48
After pressing the button, the Intercom LED will flash green at the in-use
rate, and you will hear intercom dial tone.
You will hear a single ring tone if the called station is idle. (If the call was
made with Tone Signaling, you would hear ringback or busy tone.)
Dialing 1 after the station number will change the signaling method; see
"Tone/Voice First Signaling" for more information
If you dial a busy station:
Dial 2 or 2 1 to activate Busy Override or, if the called station is
properly equipped, Off-hook Call Announce.
Dial 3 to Executive Override (system programmable option) the
called station.
Dial 4 to set Automatic Callback.
If the called station is busy or unanswered, you can dial 7 to set a
Message Waiting Indication.
NOTE: See "Handsfree Answerback" to receive on-hook intercom calls.

MICROPHONE CONTROL

If you have a speakerphone, press the Mic button to switch the
microphone on and off while your telephone is in use (see Microphone
Cut-off). The Mic LED indicates the status of the microphone:
LED MICROPHONE
ON
OFF
FEATURE OPERATION
ON
OFF