Speed Dial - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
4. Your telephone will receive
ring tone when ABR dials the
number and it is available.
5. Lift the handset or press the
Spkr button and wait for the
party to answer.
To Cancel Automatic Busy
(ABR) Redial:
1. Press the Auto Busy
Redial button.
. . . or . . .
Press the Intercom button
and dial 4 4.
2-6
The Line—or Intercom—and Spkr LEDs will flash green. The called
telephone number will ring.
If you fail to pick up the handset or press the Spkr button within 30
seconds after a connection is made, you will hear a muted ring for
another 30 seconds, then the call will disconnect.
NOTES:
1. ABR will not be attempted while your station is busy, but will
continue to time-out.
2. With each attempt:
The Line—or Intercom—and Spkr LEDs blink when the line is
seized.
Dial tone is heard via the speaker.
The telephone number is redialed.
If busy, ABR will reset and try again.

SPEED DIAL

Speed Dial enables you to call a telephone number with a brief access
code or an optional feature button. There are two types of Speed Dial
numbers. Station Speed Dial numbers are assigned by individual station
users to their own station, and can only be dialed at their station. System
Speed Dial numbers can only be assigned from Station 10 (typically the
operator's or system administrator's telephone), but can be used by other
stations.
Your station will time out to the idle mode if the following storage
procedures are not completed within one or three minutes. The time is
set in system programming.
FEATURE OPERATION