Speed Dial Pause And Flash Storage - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Store a System Speed Dial
Number at Station 10:
1. Do Not Lift the handset.
2. Press the Redial button,
then the Speed Dial button.
3. Enter the Speed Dial code
(6 0 ~ 9 9) where you want to
store the telephone number.
4. Enter the telephone number.
5. Press the Redial button.
To Store a Hookflash:
1. Press the Flash button.
2-8
The button can be used if your telephone does not have the Speed
*
Dial button.
System Speed Dial number access codes are 6 0 ~ 9 9. (Space is
provided in Appendix B to record Speed Dial codes and their numbers.)
System Speed Dial buttons associated with the codes are assigned to
stations in system programming.
You can store up to 20 digits. See "Speed Dial Number Linking" later in
this section for instructions on storing additional digits.
It may be necessary to insert a pause or flash signal in the number. See
"Speed Dial Pause and Flash Storage" later in this section for more
details.
The number will be stored and will be dialed when the Speed Dial access
code is dialed at a station, or when an SD button associated with the
code is pressed.
Repeat this procedure to replace the stored telephone numbers with new
ones. To clear a Speed Dial entry, repeat the preceding procedure,
skipping Step 4.

SPEED DIAL PAUSE AND FLASH STORAGE

Some Speed Dial numbers may require that a pause (long or regular) or
hookflash be included in the number. For example, you may have to
enter a pause at the beginning of a Speed Dial number to allow for dial
tone delay.
If your telephone does not have a Flash button, enter the hookflash dial
code, "Cnf/Trn 4 5," where upon the flash should be stored in the Speed
Dial number string.
FEATURE OPERATION