Table of Contents
Advertisement
ZyAIR G-2000 Plus User's Guide
Figure 199 FTP Session Example
34.2.3 GUI-based FTP Clients
The following table describes some of the commands that you may see in third party FTP
clients.
Table 120 General Commands for Third Party FTP Clients
COMMAND
Host Address
Login Type
Transfer Type
Initial Remote
Directory
Initial Local Directory
34.2.4 TFTP and FTP over WAN Management Limitations
TFTP, FTP and Telnet over WAN will not work when:
1 You have disabled Telnet service in menu 24.11.
2 You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet
service.
3 The IP address in the Secured Client IP field in menu 24.11 does not match the client IP.
If it does not match, the ZyAIR will disconnect the Telnet session immediately.
4 You have an SMT console session running.
353
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds
297.89Kbytes/sec.
ftp> quit
DESCRIPTION
Enter the address of the host server.
Anonymous.
This is when a user I.D. and password is automatically supplied to the server for
anonymous access. Anonymous logins will work only if your ISP or service
administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer files in either ASCII (plain text format) or in binary mode.
Specify the default remote directory (path).
Specify the default local directory (path).
Chapter 34 Firmware and Configuration File Maintenance
Advertisement
Table of Contents
Troubleshooting
