Table of Contents
Advertisement
ZyAIR G-2000 Plus User's Guide
Figure 185 Menu 23 System Security
From Menu 23- System Security, enter 2 to display Menu 23.2 – System Security –
RADIUS Server as shown next.
Figure 186 Menu 23.2 System Security : RADIUS Server
The following table describes the fields in this menu.
Table 113 Menu 23.2 System Security : RADIUS Server
FIELD
Authentication Server
Active
Server Address
Port
Shared Secret
Accounting Server
333
Menu 23 - System Security
1. Change Password
2. RADIUS Server
4. IEEE802.1x
Enter Menu Selection Number:
Menu 23.2 - System Security - RADIUS Server
Authentication Server:
Active= No
Server Address= 0.0.0.0
Port #= 1812
Shared Secret= ********
Accounting Server:
Active= No
Server Address= 0.0.0.0
Port #= 1813
Shared Secret= ********
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] to select Yes and press [ENTER] to enable user
authentication through an external authentication server.
Enter the IP address of the external authentication server in dotted decimal
notation.
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator instructs
you to do so with additional information.
Specify a password (up to 31 alphanumeric characters) as the key to be
shared between the external authentication server and the access points.
The key is not sent over the network. This key must be the same on the
external authentication server and ZyAIR.
Chapter 32 System Security
Advertisement
Table of Contents
Troubleshooting
