ZyAIR G-2000 Plus User's Guide
Problems with the Password
Table 129 Troubleshooting the Password
PROBLEM
I cannot access the
ZyAIR.
Problems with Telnet
Table 130 Troubleshooting Telnet
PROBLEM
I cannot access the
ZyAIR through
Telnet.
Problems with the WLAN Interface
Table 131 Troubleshooting the WLAN Interface
PROBLEM
Cannot access the
ZyAIR from the
WLAN.
I cannot ping any
computer on the
WLAN.
377
CORRECTIVE ACTION
The Password and Username fields are case-sensitive. Make sure that you enter the
correct password and username using the proper casing.
Use the RESET button on the top panel of the ZyAIR to restore the factory default
configuration file (hold this button in for about 10 seconds or until the link LED turns
red). This will restore all of the factory defaults including the password.
CORRECTIVE ACTION
Refer to the Problems with the Ethernet Interface section for instructions on checking
your Ethernet connection.
CORRECTIVE ACTION
Make sure the wireless card is properly inserted in the ZyAIR and the link LED is on.
Make sure the wireless adapter on the wireless station is working properly.
Check that both the ZyAIR and your wireless station are using the same ESSID,
channel and WEP keys (if WEP encryption is activated).
Make sure the wireless card is properly inserted in the ZyAIR and the link LED is on.
Make sure the wireless adapter on the wireless station(s) is working properly.
Check that both the ZyAIR and wireless station(s) are using the same ESSID,
channel and WEP keys (if WEP encryption is activated).
Appendix A