Basic Setup Complete - ZyXEL Communications ZyAIR G-2000 PLUS User Manual

Table 12 Wizard 5: WAN Setup
LABEL
First DNS Server
Second DNS Server
Third DNS Server
WAN MAC Address
Factory Default
Spoof this Computer's
MAC address - IP Address
Back
Next

3.7 Basic Setup Complete

Click Back to return to the previous screen or click Finish to complete and save the wizard
setup.
Chapter 3 Wizard Setup
DESCRIPTION
Select From ISP if your ISP dynamically assigns DNS server information
(and the ZyAIR's WAN IP address). The field to the right displays the (read-
only) DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the
DNS server's IP address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not
configure a system DNS server, you must use IP addresses when
configuring VPN, DDNS and the time server.
The MAC address field allows you to configure the WAN port's MAC
Address by either using the factory default or cloning the MAC address
from a computer on your LAN.
Select this option to use the factory assigned default MAC Address.
Select this option and enter the IP address of the computer on the LAN
whose MAC you are cloning. Once it is successfully configured, the
address will be copied to the rom file (ZyNOS configuration file). It will not
change unless you change the setting or upload a different rom file. It is
advisable to clone the MAC address from a computer on your LAN even if
your ISP does not presently require MAC address authentication.
Click Back to return to the previous screen.
Click Next to continue.
ZyAIR G-2000 Plus User's Guide
62