Table of Contents
Advertisement
E_8gt.book Page 26 Tuesday, March 28, 2006 5:37 PM
ESU05080
Adjusting the rear suspension damping forces
The compression damping force can be adjusted by turn-
ing the adjuster 1.
CD-30E
20 clicks
out
Adjuster position
Minimum
Turns out b
Damping force
∗ With the adjuster fully turned lightly in direction a
CAUTION :
@
G
Do not continue to turn the adjuster in
direction a after it stops. The shock absorber
can be damaged and damping force adjustments
cannot be made.
Do not turn the adjuster in direction b more than
G
20 clicks. Even if the adjuster is continually
turned after 20 clicks, there will be no change in
the damping force.
G
Be sure to stop the adjuster at a position where
there is a click.
@
WARNING
@
This shock absorber contains highly pressurized
nitrogen gas. It could explode by improper handling,
causing injury, or property damage.
G
Do not tamper with or attempt to open the shock
absorber.
G
Do not subject the shock absorber to an open
flame or other high heat source, which could
cause it to explode.
G
Do not deform or damage the shock absorber in
any way.
G
Do not dispose of a worn or damaged shock
absorber by yourself. Take the unit to a Yamaha
dealer.
@
8-26
11 clicks
1 click
out
Standard
Maximum
∗
Turns in a
Soft
Hard
out
Advertisement
Table of Contents
