Table of Contents
Advertisement
E_8gt.book Page 25 Tuesday, March 28, 2006 5:37 PM
A
B
ESU04213
Adjusting the rear suspension spring preload
The spring preload can be adjusted by turning the spring
preload adjuster 1 on each shock absorbers.
CD-17E
Spring seat length*
Increased ←
Preload
Harder
Maximum
È a Length (front)
127.5 mm
(5.02 in)
∗ The spring seat length changes approximately 1.5 mm (0.06 in) with
each full turn of the adjuster.
CD-23E
Spring adjuster position
Preload
É Standard (rear)
WARNING
@
Be sure to have a Yamaha dealer make this adjust-
ment.
This shock absorber contains highly pressurized
nitrogen gas. It could explode by improper handling,
causing injury, or property damage.
G
Do not tamper with or attempt to open the shock
absorber.
G
Do not subject the shock absorber to an open
flame or other high heat sources, which could
cause it to explode.
G
Do not deform or damage the shock absorber in
any way.
G
Do not dispose of a worn or damaged shock
absorber by yourself. Take the unit to a Yamaha
dealer.
@
8-25
Standard
→ Decreased
←
→
Softer
Minimum
113.5 mm
112.5 mm
(4.47 in)
(4.43 in)
S
M
H
Soft
Medium
Hard
M
Advertisement
Table of Contents
