Adjusting The Engine Idling Speed - Yamaha RX10RTW Owner's Manual

E_8gt.book Page 9 Tuesday, March 28, 2006 5:37 PM
ESU04830

Adjusting the engine idling speed

CAUTION :
@
G
Be sure to have a Yamaha dealer make this
adjustment.
G Make sure that the throttle lever moves smoothly.
@
1. Remove the shroud, the left and right side covers,
and the top cover. (See pages 8-5–8-7 for removal
procedures.)
2. Start the engine and warm it up.
3. Remove the headlight unit bolts 1, and then lift up
the headlight unit.
4. Turn the idle adjusting screw 2 in or out to adjust the
engine idling speed.
Standard engine idling speed: 1,500 ± 100 r/min
5. Install the headlight unit, making sure to insert the
tabs on the headlight unit stay into the slots on the
bottom of the headlight unit.
6. Install the headlight unit bolts, and then tighten them
to the specified torque.
Headlight unit bolt tightening torque:
3 Nm (0.3 m·kgf, 2.2 ft·lb)
7. Install the top cover, the left and right side covers,
and the shroud.
8-9