Rear Wheel Removal - Yamaha Diversion 900 Owner's Manual

1. Axle nut

Rear wheel removal

WARNING
@
It is advisable to have a Yamaha
dealer service the wheel.
Securely support the motor-
cycle so there is no danger of it
falling over.
@
1. Loosen the wheel axle nut and
pinch bolt.
2. Place the motorcycle on the cen-
terstand.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Pinch bolt
3. Remove the caliper bolts and
EAU01557
wheel axle nut.
EW000122
1. Nut
2. Brake torque rod
3. Cotter pin
4. Bolt ( 2)
4. Remove the brake torque rod cot-
5. While supporting the brake cali-
6. Move the wheel to the right to sep-
NOTE:
@
Do not depress the brake pedal when
the disc and caliper are separated.
@
6-30
ter pin, nut and bolt.
per, pull out the wheel axle.
arate it from the final gear case,
then remove the wheel.
6