Rear Wheel Removal - Yamaha XJR1300M Owner's Manual

1. Locknut
2. Adjusting bolt
3. Axle nut

Rear wheel removal

WARNING
@
It is advisable to have a Yamaha
dealer service the wheel.
Securely support the motor-
cycle so there is no danger of it
falling over.
@
1. Loosen the axle nut and caliper
bolts.
2. Remove the brake torque rod nut
and bolt.
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Wheel axle
3. Place the motorcycle on the cen-
terstand.
EAU01318
4. Remove the axle nut, caliper bolts
and caliper.
EW000122
5. Loosen the locknuts and chain ad-
justing nuts on each side of the
swingarm.
6. Push the wheel forward and re-
move the drive chain.
7. Support the caliper bracket, pull
out the wheel axle and remove the
wheel assembly by pulling it back-
wards.
NOTE:
@
@
6-30
Do not depress the brake pedal
when the caliper is off the disc as
the brake pads will be forced shut.
You do not have to disassemble
the chain in order to remove or in-
stall the rear wheel.
6