Rear Wheel Removal - Yamaha AG200F Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Tightening torque:
Axle nut:
39 Nm (3.9 m0kgf,
1
28.2 ft0lbf)
2
8. Adjust the brake lever free
play. (See page 6-16 for front
3
brake lever free play adjust-
ment.)
4
5
6
7
8
9
6
5
4
3
1. Brake torque rod
2. Brake torque rod nut and bolt
3. Brake torque rod cotter pin
4. Brake camshaft lever
5. Rear brake pedal free play adjusting nut
6. Brake rod

Rear wheel removal

w
8 It is advisable to have a
Yamaha dealer service the
wheel.
8 Securely support the motorcy-
cle so there is no danger of it
falling over.
1. Remove the cotter pin, nut and
the brake torque rod bolt from
the brake shoe plate.
6-34
1
2
1. Axle nut
2. Remove the brake free play
adjusting nut and brake rod
from the brake cam lever.
3. Loosen the wheel axle nut.
EAU01732*
4. Elevate the rear wheel by plac-
EW000122 ing a suitable stand under the
engine.
5. Remove the wheel axle nut.
6. Pull out the axle.
7. Slide the wheel to the right
and pull
remove.
1
it backwards to