Sidestand; Sidestand/Clutch Switch Operation Check - Yamaha Diversion 900 Owner's Manual

Sidestand

This model is equipped with an ignition
circuit cut-off system. The motorcycle
must not be ridden when the sidestand
is down. The sidestand is located on
the left side of the frame. (Refer to
page 5-1 for an explanation of this sys-
tem.)
WARNING
@
This motorcycle must not be operat-
ed with the sidestand in the down
position. If the stand is not properly
retracted, it could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
Yamaha has designed into this
motorcycle a lockout system to as-
sist the operator in fulfilling the re-
sponsibility of retracting
sidestand. Please check carefully
the operating instructions listed be-
low and if there is any indication of a
malfunction, return the motorcycle
to a Yamaha dealer immediately for
repair.
@
INSTRUMENT AND CONTROL FUNCTIONS
EAU00330
Sidestand/clutch switch
operation check
Check the operation of the sidestand
switch and clutch switch against the in-
formation below.
WARNING
@
Be sure to use the centerstand
EW000044
during this inspection.
If improper operation is noted,
consult a Yamaha dealer.
@
CD-08E
TURN MAIN SWITCH TO "ON" AND
ENGINE STOP SWITCH TO "
TRANSMISSION IS IN GEAR AND
SIDESTAND IS UP.
the
PULL IN CLUTCH LEVER AND
PUSH START SWITCH.
ENGINE WILL START.
EAU00332 CD-08E
CLUTCH SWITCH IS OK.
SIDESTAND IS DOWN.
ENGINE WILL STALL.
EW000046
SIDESTAND SWITCH IS OK.
".
3-18
3