Rear Wheel Removal - Yamaha RT100M Owner's Manual

5. Install the cotter pin.
Always use a new cotter pin.
6. Install the brake cable and adjust-
ing nut.
7. Adjust the brake lever free play.
(See page 6-13.)
PERIODIC MAINTENANCE AND MINOR REPAIR
EW000124
1. Cotter pin
2. Nut
3. Brake torque rod
4. Adjusting nut
5. Brake rod

Rear wheel removal

It is advisable to have a Yamaha
l
dealer service the wheel.
Securely support the machine
l
so there is no danger of it falling
over.
1. Cotter pin
2. Axle nut
1. Remove the cotter pin, nut and the
EAU01732
2. Remove the brake free play ad-
EW000122
3. Loosen the wheel axle nut.
4. Elevate the rear wheel by placing
5. Remove the wheel axle nut cotter
6-22
brake torque rod bolt from the
brake shoe plate.
justing nut and brake rod from the
brake cam lever.
a suitable stand under the engine.
pin and the axle nut.