INSTRUMENT AND CONTROL FUNCTIONS
3
1. Shift pedal
Shift pedal
This motorcycle is equipped with a con-
stant-mesh 5-speed transmission.
The shift pedal is located on the left
side of the engine and is used in com-
bination with the clutch when shifting.
1. Front brake lever
2. Position adjusting nut
EAU00157
3. Proper position
a. Adjusting range
Front brake lever
The front brake lever is located on the
right handlebar and is equipped with a
position adjuster.
To activate the front brake, pull the le-
ver toward the handlebar.
To adjust the front brake lever position,
turn the adjusting nut while pulling the
lever forward. Make sure the mark "
on the adjusting nut is aligned with the
mark "
" on the lever.
1. Rear brake pedal
Rear brake pedal
The rear brake pedal is on the right
EAU00160
side of the motorcycle. Press down on
the brake pedal to apply the rear brake.
"
3-11
EAU00162
Need help?
Do you have a question about the Diversion 900 and is the answer not in the manual?