Final Gear Oil Replacement; Air Filter - Yamaha Diversion 900 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Final gear oil drain bolt
2. Final gear oil
3. Correct level
4. Final gear oil filler bolt

Final gear oil replacement

1. Put the motorcycle on the center-
6
stand.
2. Place an oil pan under the final
gear case.
3. Remove the oil filler bolt and the
drain bolt to drain the oil.
4. Install and tighten the drain bolt to
the specified torque.
Tightening torque:
Drain bolt:
23 Nm (2.3 m·kg)
5. Fill the gear case with the recom-
mended oil.
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
If desired, an SAE 80W90 hypoid
gear oil may be used for all condi-
tions.
Final gear oil quantity:
0.2 L
NOTE:
@
EAU02975 "GL-4" is a quality and additive rating.
Hypoid gear oils rated "GL-5" or "GL-6"
may also be used.
@
WARNING
@
Do not let foreign material enter the
final gear case. Be sure oil does not
get on the tire or wheel.
@
6. Install the oil filler bolt.
7. After replacing the final gear oil, be
sure to check for oil leakage.
1. Fuel tank
2. Fuel sender lead
3. Fuel hose
4. Fuel cock

Air filter

The air filter should be cleaned at the
specified intervals. It should be cleaned
EW000066
more frequently if you are riding in un-
usually wet or dusty areas.
1. Remove the seat.
2. Turn the fuel cock lever to "OFF"
6-11
and disconnect the fuel hose.
EAU00574*