Axis Accelerometer; Digital Temp Sensor; Option Links And Jumper Settings - Renesas RX Family User Manual

The National Semiconductor 10/100 DP83640 Precision PHYTER
Time Protocol (PTP) providing precision clock synchronization for real-time industrial connectivity. The RDK includes a
GPIO/Interrupt connection between the PHY and the RX62N for PTP event processing, and a direct LED connection for
timing indications. The DP83640 captures a time stamp at the physical layer level with an accuracy of <10ns. Note:
National Semiconductor recommends using the DP83848J as it is less expensive if 1588 is not necessary.
©National Semiconductor Corporation, March 2010 National and PHYTER are registered trademarks of National Semiconductor. All other products are
trademarks of their respective holders. All rights reserved.
6.11. 3 – Axis Accelerometer
The RDK includes an Analog Devices ADXL345 3–axis accelerometer. The part is connected to I2C SDA (Micro Pin 33)
and SCL (Micro Pin 34).

6.12.Digital Temp Sensor

An ADT7420 Digital Temperature Sensor is also on the RDK. It is connected to the I2C SDA (Micro Pin 33) and SCL pins
(Micro Pin 34).

6.13. Option Links and Jumper Settings

Table 6-9 and 6-10 detail the function of the various option links contained on the RX62N RDK. The default configuration
is indicated by BOLD text. Table 6-9 details the Ethernet LED Configuration Resistor.
Reference Function
R12 Ethernet
Configuration
Ethernet Configuration Options
Fitted
LED Configuration – Link/Activity (J1.L),
Speed (LED14), Collision (J1.R)
Table 6-9: Ethernet Configuration Options
®
Ethernet PHY supports the IEEE1588 Precision
Alternative (Removed)
LED Configuration – Link (J1.L),
Speed (LED14), Activity (J1.R)
15
Related
To
-