TIPTEL INNOVAPHONE 200 Manual page 55

The following functions are pre-defined:
indirect dialling ....................... With this function you can enter a phone number or
quick dialling .......................... With this function you can enter a phone number or
call diversion ........................... For each diversion type you can enter a phone
call diversion off ...................... Cancel call diversion.
lock phone .............................. Activate the phone lock function.
ringing on / off ........................ Enable or disable the ringer.
call waiting off / once .............. Enable or disable call waiting.
no present. off / on ................. Enable or disable calling line identification
headset off / on ....................... Enable or disable the headset.
calls (inbound) ........................ Call up the list of calls received.
.
Programmed function keys can only be used when the phone is on standby.
Configuration via phone
copy an entry from your phonebook. When you
press the function key the number is displayed at the
key position. The call is initiated by lifting the
handset or pressing the loudspeaker key. The
display is cleared when you press another key or
automatically after 10 seconds. The next condition is
set regardless of whether the number was dialled or
not.
copy an entry from your phonebook. A call is
immediately initiated in speakerphone (hands-free)
mode.
number or copy an entry from your phonebook.
presentation.
55