Speaker Setup (Easy Setup) - Kenwood KRF-V6400D Instruction Manual

Speaker setup (Easy Setup)

The speaker settings can be completed by simply selecting the
room type and listening position. The audio will be corrected
automatically according to the characteristics of the speaker
system in use.
If more detailed speaker settings are required, use the procedure
in <Speaker setup (Detailed Setup)> £.
MULTI CONTROL
1
Press [EASY SETUP] to enter the Easy Setup mode.
2
Set the listening room size.
Use [MULTI CONTROL] to select your room type.
[EASY SETUP]
3
Select the listening position.
Use [MULTI CONTROL] to select your listening position.
[EASY SETUP]
The unit exits the Easy Setup mode, and the speakers are
set up as shown below.
Subwoofer \ ON
Front speaker \ Avarage size
Center speaker \ Avarage size
Surround speaker \ Avarage size
Surround Back speaker \ OFF
Subwoofer Re-mix \ ON
For details on the setting contents, see <Speaker setup
(Detailed Setup)> £.
• Easy setup with may not be appropriate with certain
speaker systems or listening environment. In this case, go
through <Speaker setup (Detailed Setup)>.
• Easy setup can set only the 5.1 channel system.
For KRF-V6400D : If the setup for 6.1-channel system is
required, go through <Speaker setup (Detailed Setup)>.
• Surround Back speaker : KRF-V6400D only
• Subwoofer Re-mix:
Mixes the bass tone of other channels to the subwoofer
channel.
22
KRF-V6400D/KRF-V5450D
EASY SETUP
Reference for listening room size
4m (13'1-7/8")
3m (9'10-3/8")
2 2
12m 24m
SMALL MEDIUM
Reference for listening position
5m (16'5-3/8")
2
35m
LARGE
FRONT
CENTER
REAR