Setting The Speaker Setup - Kenwood BDR-A7 Instruction Manual

Setting the speaker setup

• After you have installed this receiver and connected all the components, you should adjust the speaker settings for the
optimum sound acoustic according to your environment and speaker layout.
• Even when you change speakers, speaker positions, or the layout of your listening environment, you should
adjust the speaker settings, too.
• Settings with* are the default.
• SPK CFG (SPEAKER CONFIGURATION) : To adjust the speakers depending on whether they are connected or not.
• X OVER (CROSSOVER FREQUENCY) :
• CH (CHANNEL) LEVEL :
• DISTANCE (SPEAKER DISTANCE) :
English
20
BDR-A7_EN_CS3.indb 20 BDR-A7_EN_CS3.indb 20
SPK CFG F LARGE* / SMALL
C LARGE* / SMALL / NO
S LARGE* / SMALL / NO
SB LX2 / LX1 / SX2 / SX1 / NO*
SW YES* / PLUS / NO
X OVER X OVER 50 / 80 / 100* / 150 / 200
CH LEVEL T TONE M* / A
DISTANCE L 3.0 M* / 0.1 ~ 9.0
C 3.0 M* / 0.1 ~ 9.0
R 3.0 M* / 0.1 ~ 9.0
SR 3.0 M* / 0.1 ~ 9.0
SBR 3.0 M* / 0.1 ~ 9.0
SBL 3.0 M* / 0.1 ~ 9.0
SL 3.0 M* / 0.1 ~ 9.0
SW 3.0 M* / 0.1 ~ 9.0
To select the desired crossover frequency.
To adjust each channel level with the test tone.
To select the distance between the listening position and each speaker to
set the delay time automatically for optimum surround playback.
L 0 dB* / -15 ~ +15
C 0 dB* / -15 ~ +15
R 0 dB* / -15 ~ +15
SR 0 dB* / -15 ~ +15
SBR 0 dB* / -15 ~ +15
SBL 0 dB* / -15 ~ +15
SL 0 dB* / -15 ~ +15
SW 0 dB* / -15 ~ +15
11.3.10 6:59:36 PM 11.3.10 6:59:36 PM